CONDUX 08690001 FIBER PULLER PACKAGE 1 NEW The Fiber Optic Cable Puller from Condux sets new standards for safe, accurate pulling of fiber optic cables. Only the Condux puller can offer load cell torque input for the most accurate tension measuring available. Unlike most hydraulic measuring systems, this system is not affected by changes in oil temperature, component age and power source. That means the Condux Fiber Optic Cable Puller does not need to be recalibrated under different weather conditions.
These pullers consist of a hydraulic motor, variable-speed foot control, manual flow control valve for adjusting maximum speed and a manually adjustable pressure relief valve for adjusting the ultimate pull tension. A footage counter is also included.
The Condux Fiber Optic Cable Puller features an optional electronic tension control system with adjustable digital load limits and a load cell tension measuring device. The electronic tension control system directly measures the rotational torque at the motor, thereby indicating actual cable pulling forces. The load limits are coupled to an audible alarm and automatic puller shutoff with load holding. The control box is powered by a 12 volt DC input to run off a vehicle battery or Condux's Portable Hydraulic Power Pack.
Also available is a 4" (102 mm) strip chart recorder incorporated into the electronic control box for a permanent record of the cable pull.
Go to...Cable BendersCable BlocksStringing BlocksCable CaddiesCable Positnrs.Corner BlocksHand ToolsLay-Up SticksPullersReel HandlingUndergrd ToolsWire Lifters--------------Cable BlowingCable GuidesCable PullingFishing & Rodng.Other ProductsPulling EyesSwivels & Accss.--------------Hydraulic PullerHydr. Puller-TensionerHydraulic TensionerAccessories
FAQ's
Manual
Fiber Optic Puller Pole Mount Frame
Accessories
Optional Electronic Control
System for FO Puller
Remote Mounting Stand
Pole Mounting Frame
Hitch Mount
Capstans
Mounting Sockets
Calibration Dynamometer
Condux fiber puller package includes fiber optic cable puller, foot control & hoses -
iId oes NOT include Capstan, remote mounting stand or a base mount. Chart Recorder & Cord Cable Pulling Lubricants
Components
Condux Fiber Optic pullers are multi-component products. Order a puller to fit your requirements with combinations of these components (see ordering information). Components include:
Hydraulic puller mounted on a standard 2 1/2" (64 mm) square tube
Foot control / hydraulic control assembly
Electronic control box
Chart recorder
Hoses and cords to connect the puller to the foot control assembly and electronic control box
The Fiber Optic Cable Puller also comes installed in a Trailer, which includes a gasoline driven hydraulic power source, cable puller mounts, leveling and stabilizing hardware, and lockable storage areas.
WARNING: The Fiber Optic Cable Puller is not to be used as a hoist or for lifting, supporting or transporting people or loads.
Specifications
Capstans
12 in (305 mm) Diameter Capstan
30 in (762 mm) Diameter Capstan
42 in (1067 mm) Diameter Capstan
50 in (1270 mm) Diameter Capstan
PULLING FORCE Maximum 2,000
PULLING SPEED No Load 93.9 FT / MIN
PRESSURE 2,000 to 2,500 psi (137 to 172 bar)
FLOW 6 to 10 gpm (22.7 to 37.9 lpm)
PEAK POWER 8 HP (5.97 kw)