Dcd Design/Cable Spinning Equipment 32810-400 Hanger - Double New
For Pulling Fiber Optic Cable, Dcd Design/Cable Spinning Equipment Has A Special Series Of Sheaves And Quadrants That Will Allow The Maximum Possible Bend Radius For The Application. All The Sheaves Are Aluminum While The Quadrant Side Plates Are 3/16” Steel, Giving The Best Combination Of Light Weight And Strength.
The F/O Quadrant Has 12 Rollers Set On A 26” Radius Giving The Cable A Minimum 26-3/4” Inside Bend Radius.
The One Piece F/O Sheave Is Sized To Fit Through A 24” Manhole And Both The Sheave And The Quadrant Can Be Used In The Dcd Design/Cable Spinning Equipment Manhole Brace.
The Hanger Arms Also Separate Easily To Allow Insertion Of The Sheave Or Quadrant In The Middle Of The Pull.