DCD DESIGN AND MANUFACTURING LTD 40010-250

Overview

Product Description

DCD DESIGN/CABLE SPINNING EQUIPMENT 40010-250 Duct Guide Fabrication 2-1/2" NEW The duct guides are designed to locate inside the ducting and provide an anchor point for the TUF-Lugger to pull against. Each TUF-Lugger is provided with the duct guides marked with an *. These and all other units are also available individually. Each duct guide has mounting holes for attachment to the last Sheave on the TUF-Lugger. The assembly of the duct guide to the TUF-Lugger is reversed for upward direction as opposed to downward direction. Each unit also has a pair of holes used for indexing the position of the guide in increments of 7-1/2 degrees. All DCD DESIGN/CABLE SPINNING EQUIPMENT duct guides are open on one side to allow easy installation or removal without feeding over the cable or pulling rope.

Product Videos

Custom Field

Product Reviews

Write a Review

DCD 40010-250 Duct Guide Fabrication 2-1/2" NEW