FLUKE CABLEIQ QUALIFICATION TESTER CIQ-100 NEW At a Glance
Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
Identifies unused switch ports that can be reallocated
Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
Tests all copper cabling media: twisted-pair, coax, and audio cabling
CableIQ Qualification Tester Includes CableIQ with remote adapter, CableIQ Reporter software CD, (2) RJ45-RJ45 patch cord, USB cable, coax "F" push-on adapter, owners CD and quick start guide, (4) AA batteries, soft carry case
CableIQ Specifications
Cable types supported
UTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification autotests
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported tests
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
Wiremap
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find fault
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storage
Up to 250 qualification test results
Power
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life
20 hours of typical use, without backlight
Other battery types supported
4AA photo lithium, NIHM, NICAD
Dimensions and weight
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)