GMP GENERAL MACHINE PRODUCTS 68492

Overview

Product Description

GENERAL MACHINE PRODUCTS 68492 PULLER STRAND L NEW This forged steel unit is used when pulling or tensioning suspension strand. The L, H, and B Strand Pullers feature a fixed and movable jaw linked to a clevis. Applying pull to the clevis causes the jaw in turn to grip the strand. The Model B Strand Puller is designed for tensioning figure-8 cable on 1/4 in. (6-7 mm) poly jacketed strand, and designed for pulling loads up to 5000 lbs. (2268 kgs) A safety chain permanently secured to a shackle acts as a safety tether in the event the grip disengages The Model H Strand Puller is designed for tensioning strand sizes from 3/8 in. through 1/2 in. (9.5-12.7 mm) and for pulling loads that exceed 5000 lbs. but not more than 10,000 lbs. (4535 kgs) The Model L Strand Puller is designed for tensioning strand sizes from 3/16 in. through 7/16 in. (4.7-11 mm) and for pulling loads up to 5000 lbs. (2268 kgs) NOTE: The gripping power of the strand puller is greatly reduced if either the grooves of the jaw or the strands are coated with oil, grease, or paraffin. For best results wipe both the strand at the point of attachment and the grooves of the puller jaws thoroughly with a cleaning solution. Ordering Information P/N Description Weight -------------------------------------------------------------------------------- 68490 Model B Strand Puller 6 lbs. (3 kgs) 68491 Model H Strand Puller 15 lbs. 8 oz. (7 kgs) 68492 Model L Strand Puller 6 lbs. 4 oz. (3 kgs)

Product Videos

Custom Field

Product Reviews

Write a Review

GMP 68492 PULLER STRAND L NEW