GENERAL MACHINE PRODUCTS 70445 CAPSTAN FO HUB ONLY 600# offers you a choice of several lightweight aluminum alloy units that mount on a standard 2- 7/16 in. (62 mm) diameter drive shaft with either a bayonet or a cross pin type of connection.
These capstans can be used as end pullers or mid-assist booster pullers that will allow long, straight-through, splice-free pulls
Offered with a torque limiter between the drive spindle and the inner hub, factory set at standard 600 pounds-force (2669 N-force), but may be calibrated to other torque values, if requested
Also available with a steel shaft and no torque limiter for no-slip applications with a maximum rated load of 1500 lbs. (6672 N)*
Can also be used with Fiber Optic Cable Blowers to place longer lengths of cable without splicing.
P/N Working Dia. Working Width Pull Weight
in. mm in. mm lbs-force Newtons lbs. kgs
--------------------------------------------------------------------------------
15472 25 635 5 127 600 2669 80 34
15479 25 635 5 127 1000 4448 100 45
15470 25 635 5 127 n/a* n/a* 86 39
70351 32 813 7.5 190 600 2669 80 37
70381 32 813 7.5 190 750 3336 80 37
70471 32 813 7.5 190 1000 4448 80 37
70472 32 813 7.5 190 n/a* n/a* 86 39
70473 40 1016 7.5 190 600 2669 135 61
70475 40 1016 7.5 190 1000 4448 135 61
70478 40 1016 7.5 190 n/a* n/a* 100 45
* = Custom settings as required by user