GMP GENERAL MACHINE PRODUCTS 75348

Overview

Product Description

GENERAL MACHINE PRODUCTS 75348 CUTTER RATCHET 556ACSR NO POUCH NEW This rugged cutter is designed to cut the following: ACSR power cable up to and including 556 kcmil 500 kcmil hard drawn electrical conductors 1.40 in. (35,6 mm) maximum outside diameter 750 kcmil soft drawn electrical conductors 1.60 in. (40,6 mm) maximum outside diameter Self-support (figure 8) telecommunications cable 1.74 in. (44,2 mm) with a maximum support messenger size of .276 in. (7mm) Overall length 18 in. (457 mm) Note: Do not exceed these maximum cutting capacities for this tool or tool damage will occur. When cutting with this tool, observe the following important directions: The cable must enter into the jaws of the tool exactly perpendicular (90 degrees) to the cutting blades so as to result in a circular cross-section cut. When cutting self-support cable, always orient the supporting strand so it faces the handles for maximum leverage. If you encounter excessive cutting resistance, use a one click cutting cycle until the cutter moves freely. Tighten the fulcrum nut periodically and keep the handle bolts tight. The tool will not operate properly unless the fulcrum nut is at least 15 ft-lbs. (20 Newton meters). Blades made from 6150 alloy steel Never use this tool to cut electrically energized cable. Severe or fatal injury may result. Hard Cable Ratchet Cutter 1.6" P/N 75248 Weight: 4-3/8 lbs. (2 kgs) with scabbard P/N 75348 Without scabbard

Product Videos

Custom Field

Product Reviews

Write a Review

GMP 75348 CUTTER RATCHET 556ACSR NO POUCH NEW