Jameson J103-171114003 MicroFlow Buckle Detection Sensor Arm, 3 mm 810841033798
Jameson J103-171114003
MicroFlow Buckle Detection Sensor Arm, 3 mm
MicroFlow TOUCH Buckle Detection Sensor Arms
Sensor Arm, 3.0 mm
MicroFlow TOUCH has a unique protection technology securing that there is no damage to the fiber cable. The protection technology stops the machine if the fiber cable meets an obstacle. The stop occurs because the cable gets bent inside the fiber blowing machine as the fiber cable meets an obstacle. This is registered by a sensor, and the motor stops immediately. The machine will also stop automatically if the motor exceeds the preset maximum torque level (see section about Torque Off-Set for the minimum effect needed depending on the speed). In both cases of protection the machine stops immediately so the fiber cable does not get damaged.