Klein 33734Ins Screwdriver Set, Slim-Tip Insulated Phillips, Cabinet, Square, 4-Piece 092644328114 N
Klein 33734Ins Screwdriver Set,
Slim-Tip Insulated Phillips, Cabinet, Square, 4-Piece 092644328114 New
P/N 33734Ins
Screwdriver Set
Slim-Tip Insulated Phillips
Cabinet, Square
4-Piece
Upc 092644328114
Slim-Tip Insulated Screwdriver Set Includes: 4-Inch Round Shank In A #2 Phillips And 1/4-Inch Cabinet Tips; 6-Inch Round Shank In A #2 Square And 3/16-Inch Cabinet Tips
1000-Volt Rated Insulated Screwdrivers With Slim-Tips That Allow For Greater Access Into Tight Spaces
Insulated Blade Is Flush With The Tip To Help Reduce Nicking The Insulation
Layer Of Orange Impact And Flame-Resistant Insulation Protects From Energized Sources
Made In Usa
Cushion-Grip™ Handles For Greater Torque And Comfort
Tip-Ident Quickly Identifies The Type Of Screwdriver Tip Orientation So You Can Easily Engage The Screwdriver Tip With The Screw
Meets Or Exceeds Astm F-1505-16 And Iec 60900:2018
Specifications
Application: For Work Near Energized Sources
Special Features: Slim Profile Tips
Included:
4 Screwdrivers: 4'' (10.2 Cm) Long Shank In 1/4'' (0.6 Cm) Cabinet Tip, #2 Phillips; 6'' (15.2 Cm) Long Shanks In 3/16'' (0.5 Cm) Cabinet Tip, #2 Square Tip
Tip Type: Cabinet, Phillips, Square
Magnetic: No
Tip Size: Cabinet Tip: 1/4'' (6.4 Mm), 3/16'' (4.8 Mm); Phillips: #2; Square Tip: #2
Insulated: Yes
Shank Type: Round
Shank Length: 4'' (10.2 Cm), 6'' (15.2 Cm)
Material: Steel, Plastic
Handle Material: Rubber
Handle Color: Black
Handle Length: 4.31'' (10.9 Cm)
Handle Diameter: 1.24'' (3.2 Cm)
Color Code: Orange
Overall Length: 8.31'' (21.1 Cm); 10.31'' (26.2 Cm)
Overall Height: 1.24'' (3.2 Cm)
Overall Width: 1.24'' (3.2 Cm)
Number Of Pieces: 4
Type: Slim-Tip Insulated Screwdriver
Standard: Astm F-1505-16, Iec 60900:2018
Weight: 10.4 Oz (295 G)
Upc: 092644328114
Warnings
Only Use Tools That Are Marked With The Official International 1000-Volt Rating Symbol Shown Below, If There Is Any Chance That The Tools Will Make Contact With An Energized Source.
Whenever Possible, Always De-Energize Lines And Equipment Prior To Working On Or Around Them.
Always Inspect Your Tools Before Use.
Do Not Touch Uninsulated Portion Of The Tool Or Any Conductive Object When Either Might Contact An Energized Source.
Keep Tool Clean, Dry And Free Of Any Surface Contaminants.