AFL TELECOMMUNICATIONS SMLP 4-4 SC

Overview

Product Description

AFL TELECOMMUNICATIONS/NOYES SMLP4-4 SM/MM POWER MTR/LGHT SOURCE KIT (NEW) SPECIFY CONN AT TIME OF ORDER SMLP 4-4 SM/MM test kit with Wave ID and Set Reference The SMLP 4-4 test kit combines the OPM 4-2D optical power meter and OLS 4 integrated LED and LASER light source and is ideally suited for testing fiber optic networks with hybrid (single-mode and multimode) cables. The OLS 4 features 850 nm and 1300 nm LED output from a multimode output port and 1310 nm and 1550 nm LASER output from a single-mode output port. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. Both output ports are equipped with removable SC (FC & ST available) adapters to allow the output connectors to be inspected and cleaned. The OPM 4-2D offers Wave ID, automatic wavelength identification and switching, when used with the OLS 4. Multiple test Tone detection is provided for fiber identification. The OPM 4-2D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4-2D or OLS 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4-2D optical input port accepts AFL TELECOMMUNICATIONS/NOYES thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-2D and OLS 4 are fully N.I.S.T. traceable. Features: Rugged, handheld, lightweight Designed for field use Certify multimode and single-mode links per TIA/EIA standards Wave ID - automatic wavelength identification and switching Dual Wave ID, single Wave ID, CW, and modulated Tone (on single-mode output) 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone Large LCD with Backlight Power measurements in dBm or µW; insertion loss in dB Reference power level storage AA alkaline, optional rechargeable NiMH battery pack or AC adapter Low battery indicator Free 50 µm and 62.5 µm mandrels Cost-effective, easy to use N.I.S.T traceable OLS 4 Accessories 4050-00-0119 AC Adapter, 90-264 VAC to 9 VDC, select power cord 8400-00-0072 FC Interface/SM/ MM 8400-00-0073 SC Interface/SM/ MM 8400-00-0074 ST Interface/SM/ MM

Product Videos

Custom Field

Product Reviews

Write a Review

NOYES SMLP4-4 SM/MM (SC) POWER MTR/LGHT SOURCE KIT (NEW) SPECIFY CONN AT TIME OF ORDER