PELSUE CARRY CASE FOR FT-C70 TOWER NEW
The Pelsue #FT-C70 Composite Fall Arrest Tower is constructed of carbon fiber & aluminum, and also incorporates several steel and engineered plastic components. The Model #FT-C70 possesses a composite upper section (#500573-001) which can be inserted into its standard base (#500019-001) to provide multiple anchor points that are elevated 70” above a working surface. The 70” height places the anchorages at the desirable anchorage level of the upper back. The #FT-C70 can also be used in a “Rescue Mode” in the event a person or persons has to be rescued. The tower can be leaned over up to 23 degrees from the vertical using the adjusting screw pegs in the base which allows greater clearance away from the side of the work platform for raising or lowering a fallen worker. All specifications, instructions, and procedures provided within the product manual or upon Pelsue Specification Documents are based upon and only valid for usage with approved Pelsue base systems. The T.A. Pelsue Company can not verify equipment safety and/or compliance if the product is anchored with anything other than a Pelsue-Brand base.