AMERICAN POLYWATER TC-1 SqueekyKleen Telcom Cleaner-Individual Saturated Wipe 02786806600 Case OF 144
Fans Fiber Fast!
Polywater®
SqueekyKleen
Communications Cleaner
A specially formulated cleaner for removing pik and cable gels from loose-tube and ribbon fiber in preparation for splicing.
Hear the difference!
SqueekyKleen Communications Cleaner -- Preps cable for splicing. Cleans off pik and fans loose-tube or ribbon fiber in two wipes without alcohol.
Cleans off pik without the use of alcohol
Minimal wiping (2 wipes only)
No residue
Safe to use on ribbon fiber
Fans fiber quickly
Cleans fiber squeaky clean
Tested and approved
New SqueekyKleen cleans and fans fiber in two wipes without alcohol, saving time and money. Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing. SqueekyKleen is less harsh on hands and reduces chemical odors and vapor concentrations to a minimum in splice trailers and vaults. SqueekyKleen's unique formulation and specially designed high-performance towelette work to remove pik from the entire surface of loose-tube or ribbon fibers, leaving no residue. SqueekyKleen helps keep splice equipment clean of contamination for better fiber alignment and splice quality. Safe on acrylate and Mylar®.
Specifications
Cleaning: When wiping a 3-foot section of 12-count fiber from a buffer tube, the pre-saturated towel will squeak and fan fibers with 2 wipes.
Solvency Power: At 68° F (20°C), will dissolve .020 (.5mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).
Residue: When placed on a clean glass panel and dried, the solvent shall not leave any visible residue (<100 ppm).
Water Content: When tested by the ASTM 1533B method, water content shall be less than 75 ppm.
Flash Point: When tested via a Pensky-Martin Closed Cup Test (ASTM D93), the cleaner shall have a flash point above 140°F.