POLYWATER TC-35LR

Overview

Product Description

AMERICAN POLYWATER TC-35LR Qt SqueekyKleen Telcom Cleaner w/Sprayer 02786806650 Case OF 12 Cleans off pik without the use of alcohol Minimal wiping (2 wipes only) No residue Safe to use on ribbon fiber Fans fiber quickly Cleans fiber squeaky clean Tested and approved New SqueekyKleen cleans and fans fiber in two wipes without alcohol, saving time and money. Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing. SqueekyKleen is less harsh on hands and reduces chemical odors and vapor concentrations to a minimum in splice trailers and vaults. SqueekyKleen's unique formulation and specially designed high-performance towelette work to remove pik from the entire surface of loose-tube or ribbon fibers, leaving no residue. SqueekyKleen helps keep splice equipment clean of contamination for better fiber alignment and splice quality. Safe on acrylate and Mylar®. Specifications Cleaning: When wiping a 3-foot section of 12-count fiber from a buffer tube, the pre-saturated towel will squeak and fan fibers with 2 wipes. Solvency Power: At 68° F (20°C), will dissolve .020 (.5mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping). Residue: When placed on a clean glass panel and dried, the solvent shall not leave any visible residue (<100 ppm). Water Content: When tested by the ASTM 1533B method, water content shall be less than 75 ppm. Flash Point: When tested via a Pensky-Martin Closed Cup Test (ASTM D93), the cleaner shall have a flash point above 140°F.

Product Videos

Custom Field

Product Reviews

Write a Review

POLYWATER TC-35LR Qt SqueekyKleen Telcom Cleaner w/Sprayer 02786806650 Case OF 12