TYCO TELECOMMUNICATIONS DT2-ICT-25VT03F

Overview

Product Description

TYCO TELECOMMUNICATIONS (COMMSCOPE)DT2-ICT-25VT03F-DB3-1BXA 25 PAIR INTEGRATED CLOSURE TERMINAL STRAND MOUNT 431576-000 The DTermiantor 2 ICT/ICX/ICP integrated closure terminal is a strand-mounted, free breathing, aerial closure terminal intended for new construction and rehabilitation, providing mechanical strength, security, and environmental protection for your splice. The kit contains four main components: two gel end-pieces, one central housing, and one DTerminator 2 terminal block. The product is available in two splice chamber sizes: A and B with any block size up to 25 pair. The DTerminator 2 ICT integrated closure terminal features a convoluted design with a self-supporting bond assembly for easy installation with few parts. Recommended for use on non-pressurized polyethylene-sheathed aerial cable (including self-supporting aerial cable), the DTerminator 2 terminals housing features a swing-up 180¢ª access door, facilitating drop wire installation, and terminal block access. The DTerminator 2 ICX upgradable terminal block includes a grounding strip. Although it is an unprotected model, the ICX's driver modules can be easily replaced in the field with protected driver modules, creating a protected pair unit when needed, saving unnecessary initial cost. The DTerminator 2 ICP protected terminal block contains driver modules with factorysealed circuit protectors. Each connection is protected by a three element gas discharge tube. Product Information TYCO TELECOMMUNICATIONS (COMMSCOPE)Electronics unique IIDC (inverted insulation displacement connector) accommodates 18 - 24 AWG (1.02 - .51 mm) drop wires without requiring wire stripping or special tools. Factory-tested, field-proven systems provide reliable, sealed connections with intuitive, easy-to-install, craft-friendly modules. TYCO TELECOMMUNICATIONS (COMMSCOPE)Electronics GelGuard sealing gel technology provides superior sealing performance in environmentally demanding terminal applications. Gel-protected test ports in the top of each driver module facilitate fast, easy testing with standard test clips. Special circuit markers are available for easy identification of special lines. An audible click informs the craftsman when the driver is properly seated for wire insertion. A single bolt terminates each pair into a driver module through which the connection is visible. A single drop wire port further simplifies installation by eliminating the chance of placing the drop wire in the wrong port. UL Listed DTerminator 2 terminal block and integrated closure products are available in a wide range of pair counts. Protected and unprotected blocks of the same pair count are the same size, leaving plenty of room to store wirework in the compact housings. Additional blocks may be field installed in the terminal housing in the future. For example, the ICT could be purchased with a 10-pair block and a 5 or 10-pair block could be added or the ICT could be purchased with a 15-pair and an additional 5-pair block could be added. Hardware sold separately. Extension kits are available for the ICT-B. DTerminator 2 terminal products are compliant with Telcordia specification TR-NWT-000975, TR-NWT-001305, and TR-NWT-000014. 431576-000

Product Videos

Custom Field

Product Reviews

Write a Review

TYCO DT2-ICT-25VT03F-DB3-1BXA 25 PAIR INTEGRATED CLOSURE TERMINAL STRAND MOUNT 431576-000